Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Click the vertical bars on the right side of the Bandpass Filter to open the channel selector drawer. You can listen to the data coming out of any Source or Filter processor, but your spikes will sound better if the data is filtered between ~300 Hz to ~6000 kHzHz.
  • Click the "AUDIO" button to see the channels that can be monitored within this module.
  • Click on the channels you'd like to listen to. You can select as many as you'd like, and they will be overlaid.
  • Made sure the volume slider in the middle of the control panel is at least partially activated. You should now be able to hear something coming out of your computer's default audio output.
  • Move the "gate" slider to the left to remove some of the baseline noise

...