...
Daisy-chaining acquisition boards
Next board iteration should have a standard ribbon bale cable connector on (right ?or back) side that passes through a clock signal a synchronization signal that is only enabled when the master system is acquiring data. The slave systems should work as ususal, with the only exception that data isnt acquired and sent to the host unless this clk is receivedas usual. Boards should be set to slave mode with a OkWireIn or equivalent via switch in the rhythm interface UI. Linking can be done with a ribbon cable with one twisted pair on the clk pins on the master side.
no page on this yet.
See Synchronizing multiple boards
People Jakob Voigts