Versions Compared
compared with
Key
- This line was added.
- This line was removed.
- Formatting was changed.
Before you begin
Equipment needed for this job:
- Drill press or similar hole drilling machine (Fig 0A)
- Hand held electric screwdriver (Fig 0B)
- Multipurpose chuck mountable on screwdriver (Fig 0C)
Supplies needed for this job:
- #56 (.0465") and #57 (.043") drill bits (Fig 0C)
- Customized 0-80 tap plug (Fig 0E)
- Guide tube sleeves, one per shuttle (Fig 0F)
- 3D printed drive core (Fig 0G)
Prepare shuttle bolt holes
- Drill press or similar hole drilling machine (Fig 0A)
- Hand held electric screwdriver (Fig 0B)
- Multipurpose chuck mountable on screwdriver (Fig 0C)