Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Before you begin


Equipment needed for this job:

  • Completed guide tube bundles (Fig 0A; click here for building instructions)
  • Completed targeting cone (Fig 0B; click here for 3D printing instructions)

Supplies needed for this job:

  • 4"-6" lengths of Type 304 Stainless Steel Tubing, size depends upon bundle type:
      9x bundle: 13G, .095" OD, .071" ID, .012" Wall (McMaster-Carr 8988K32)
      7x bundle: 16.5G, .062" OD, .052" ID, .005" Wall (McMaster-Carr 8988K36)
      4x bundle: 17G, .058" OD, .042" ID, .008" Wall (McMaster-Carr 8988K45)

 

  • No labels